Dr. Doom Voice Mask

Introduction

For Halloween 2026 I built a Dr. Doom mask with a working voice changer. A Teensy 4.0 and audio shield pitch-shift my voice in real time and play it through a speaker in a 3D-printed chest box, while the eyes glow green behind the faceplate. I printed the mask and the box on my Bambu Lab H2S, designed the enclosure around the real parts, and did all of the soldering myself.
Dr. Doom Voice Mask
Date
October, 2026
ROLES
Designer
Builder
Functions
Real-Time Voice Changer
Adjustable Pitch Control

What?

  • Built a costume piece that changes my voice live: I talk into a mic and a deeper, pitched-down version comes out of the chest speaker

  • Printed the full mask on my Bambu Lab H2S and lit the eyes with green LEDs behind the faceplate

  • Designed a three-section chest box: a sealed chamber for the 3" speaker, a bay for the electronics, and a compartment for the battery, with lugs for a chain so it hangs at chest height

  • Planned the whole build on paper first, with every soldering job as its own step on the map

Interactive CAD · chest boxDrag to rotate · click, then scroll to zoom
Loading 3D model

How?

  • Audio path: an electret mic feeds a Teensy 4.0 with the PJRC Audio Adaptor, which pitch-shifts the signal and sends it out the line output to a PAM8403 amplifier driving a 3" 8 Ω speaker

  • Added a rotary encoder on the box: each click moves the pitch one semitone, down to 8 semitones below my normal voice, and pressing it switches between normal and Doom voice

  • Runs from a USB power bank in the bottom compartment, with an on/off switch spliced into the 5 V line

  • Checked the fit in a Fusion 360 assembly with the Teensy, amplifier and encoder modelled in place before printing the box

  • Once the mic and speaker shared a box, the system started to howl, so I tuned the mic gain and noise gate until it stayed quiet between words

Results:

  • A working real-time voice changer with pitch I can adjust on the fly from a knob on the box

  • Mic, amplifier, speaker, controls and battery all packed into one printed chest box that runs with no cables to a wall

  • Soldered the full audio chain by hand: stacking headers, mic, encoder, amplifier, speaker and power switch